Description:
WD-4602AC is a 802.11AC USB Wireless adapter using a Realtek 8812au chipset providing a maximum transfer rate of 1200Mbps.This product can bed used for computer, PSP, media player or other device which needs the flexibility of a wireless connection. It can be configured as an AP during installation,allowing you to share the internet connetion to other Wi-Fi device. The WPS button allows very convenient encryption . With the inscluded AUTO-RUN CD, even novice user can install XMR-WK-127 easily and quickly.
Realtek RTL8812au Chipset
USB 3.0 Port
Supports 802.11ac standard- The next generation of Wi-Fi
Backward compatible with 802.11 a/b/g/n products
2* 2dBi Antennas providing even better wireless performance
Ultra-fast AC1200 (866+300Mbps) wireless speed with 802.11ac
Maximum speed up to 5GHz 866Mbps or 2.4GHz 300Mbps
Dual Band connections for lag-free HD video streaming and gaming
Supports Windows 10/8/7/XP 32/64bit, MAC OS, Linu
Specification:
Interface | USB 3.0 |
Chipset | Realtek 8812AU |
Dimensions (W X D X H) | 85x24x9mm |
Antenna Type | Omni Directional |
Wireless Standards | IEEE 802.11ac, IEEE 802.11a, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b |
Frequency | 5GHz 2.4GHz |
Signal Rate | 5GHz 11ac: Up to 866Mbps(dynamic) 11a: Up to 54Mbps(dynamic) 2.4GHz 11n: Up to 300Mbps(dynamic) 11g: Up to 54Mbps(dynamic) 11b: Up to 11Mbps(dynamic) |
Reception Sensitivity | 11a 6Mbps:-88dBm 11a 54Mbps:-71dBm 11ac HT20:-65dBm 11ac HT40: -60dBm 11ac HT80:-56dBm 11b 11Mbps:-90dBm 11g 54Mbps: -73dBm 11n HT20:-71dBm 11n HT40:-68dBm |
Transmit Power | <20dBm (EIRP) |
Wireless Modes | Ad-Hoc / Infrastructure mode |
Wireless Security | Support 64/128 bit WEP, WPA-PSK/WPA2-PSK, 802.1x |
Modulation Technology | DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM |
System Requirements | Windows 8 (32/64bits), Windows 7 (32/64bits), Windows XP(32/64bits) |
Environment | Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
Installation Steps:
Windows system: Plug it into your computer and it will work automatically, then find the network settings where the picture appears on the screen to setting your password or use the default password.
Other computers’ system: Need to install the driver. (If the product does not contain a CD driver, please ignore)
First, insert the CD for your software installation
Second, go to Device Manager
Third, select the adapter which does not install the driver, then right-click on the Add / Update driver
Fourth, select the driver files for the corresponding system, then wait for finishing.
Or you can follow the steps that shows in the CD for how to install. Just find the file which match your computer system then to set up.